TRIDENT® Disposable Respiratory Protection
TRIDENT® P2 Disposable Respirators - breathing new life and technology into respiratory protection.
At Industree Group, we believe you deserve the best fitting respirator on the planet. As a result, our team designed and manufactures the TRIDENT® P2 Disposable Respirator. With advanced technology and a focus on superior fit, the TRIDENT® P2 Respirators are designed to keep you safe and comfortable in the most demanding working environments. Features include a 3-panel design, our proprietary adjustable foam nose seal, and advanced multilayer technology that provides protection against mechanically and thermally generated particulates. Industree Group understands that everyone is unique, with varying facial profiles. Therefore, we have taken a step further by introducing additional sizes, for an enhanced level of comfort and protection.
With TRIDENT® P2 Disposable Respirators available in valved and unvalved, you can breathe easy knowing you are getting the best protection possible. Whether you are a healthcare worker, an industrial worker in construction, mining, or manufacturing or simply someone looking for the best possible respiratory protection, TRIDENT® P2 Disposable Respirators are a perfect choice.
Experience the difference for yourself and see how TRIDENT® P2 Disposable Respirators are breathing new life and technology into respiratory protection.
Download Independent Fit Test Report
Importance of a correct fitting respirator
A correctly fitting respirator is essential for ensuring the safety and well-being of individuals who work in environments where airborne hazards exist.
Respirators are designed to protect the wearer from inhaling harmful substances such as dust, fumes, vapours, and gases that can cause respiratory problems and other health issues.
Donning your TRIDENT® P2 Disposable Respirator
Step 1
Position the respirator in the palm of your hand with the nose strip at your fingertips, ensuring both head straps are untwisted over the back of your hand.
Step 2
Open both the top and bottom panels of the mask and make a bend in the foam nose seal. Place the lower panel under the chin and the upper panel with the foam nose seal over the nose bridge and underneath the eyes.
Step 3
Holding the respirator with one hand, position the top untwisted head strap to the crown of the head.
Step 4
Draw the lower untwisted head strap up and over the face to below the ears and back of the neck.
DO NOT CROSS CROSSHEADSTRAPS.
Step 5
With both hands, mould the foam nose seal at the top of the mask to the nose bridge and cheeks ensuring a secure fit and seal.
Step 6
Perform a fit check (see fit check list below). Cover the front of the respirator with both hands. Inhale and exhale sharply.
Fit Check List
- If air leaks at the nose or cheek areas adjust the foam nose seal until a seal is achieved.
- If air leaks around the edge of the respirator adjust the head straps and reposition the mask until a seal is achieved.
- A successful fit check is when there is no air leakage.
- Always fit check before entering the work area.
- If a successful fit check cannot be achieved, remove and refit the respirator.
- If you still cannot obtain a successful fit check, do not enter the work area.
Doffing your TRIDENT® P2 Disposable Respirator
Step 1
The respirator may be contaminated. Touch only the head straps when removing.
Step 2
Pull the bottom strap over the top of the head.
Step 3
Pull the top strap over the top of the head.
Step 4
Dispose of respirator into the appropriate waste receptacle in accordance with site infection control and prevention policies.
Step 5
Wash and sanitise your hands thoroughly.
Important
- A fit check must be performed prior to using your disposable respirator.
- Always read the disposable respirator wearer instructions.
- Should air leakage occur at respirator edges, adjust the fit to eradicate leakage perform the above fit check.
- Should air leakage occur around the nose, adjust the nose/cheek support strip to eradicate the leakage perform the above fit check.
- When an appropriate fit seal cannot be achieved do not enter the hazardous environment follow on-site policy.
NOTE: To achieve an optimum facial seal, the wearer should be clean-shaven. It is recommended the wearer be fit tested prior to use in accordance with AS/NZS 1715: 2009 and/or onsite requirements. Training on the safe use and limitations of the disposable face mask must be performed in accordance with AS/NZS 1715: 2009 section 2.4.
FAQS
The premium TRIDENT® P2 disposable respirators have been proven to achieve the best fit test results in the market compared to any other brand, resulting in providing the best protection a P2 mask can offer when fitted correctly.
The TRIDENT® P2 Level 3 respirators are available in a variety of different sizes, including Extra Small, Small, Regular, Regular with Extended Length Head Strap, and XX Large. The TRIDENT® P2 Valved respirators are available in Regular, Regular with Extended Length Head Strap and XX Large. This ensures a perfect fit for just about any facial profile when fitted correctly.
A P1 disposable respirator will filter mechanically generated particles (for example, grinding, cutting, sanding and drilling). A P2 disposable respirator will protect against mechanically and thermally generated particles (for example, welding fumes, fertiliser and bushfire smoke).
It is essential to ensure the mask is correctly fitted to achieve the best results, this can be done by having your respirator fit tested by an accredited fit tester.
Fit testing can be performed on-site with specialised PortaCount testing equipment by our own RESP-FIT accredited fit testers or by one of our preferred fit test partners.
Contact our team on 1800 276 872 to find an accredited fit tester closest to you.
A valved mask is typically used in the Industrial space and will provide less breathing resistance when exhaling and also reduces heat and moisture build-up inside the mask. Note that a valved mask only filters particles going into the mask and not the air leaving. An unvalved mask will filter particles entering and exiting the respirator. The unvalved RTCFFP2 TRIDENT® product comes with a level three fluid rating (160 mmHg), making the RTCFFP2 TRIDENT® P2 unvalved mask a preferred option in the health industry.
Please review this informative instructional video on how to correctly don and doff a TRIDENT® P2 disposable respirator. Watch Video here
